Tag: farming

The Farm Carbon Calculator Update – October 2024

Farm Carbon Toolkit Team at annual field day - announcing update to Farm Carbon calcualtor

The calculator just got a little bit bigger and better

This October all calculator users will benefit from an incremental update to The Farm Carbon Calculator. We’re always looking and listening for ways to improve the tool – and in accordance with our annual development cycle we’ve added some as quickly as we can in this update.

The changes described below change our transparent methodology, and are listed in detail in an update note – read it

Image showing crops next to a simple calculator

© copyright Farm Carbon Toolkit – AI Generated

What’s new?

Calculated emissions adapt to reflect your crop management decisions

We know there are a wide range of practices around how crops are harvested or managed. Whereas before we relied on averages to calculate emissions here, now you can account for the specific way you manage each crop. The more detail you can enter, the more accurate your footprint will be.

The update applies to all crops – here’s some examples and the new ways the calculator estimates related emissions from these:

For agricultural crops like barley you can now choose from options relating to the amount of crop residue – you will see the following options:

  • Most of the barley straw left in the field
  • Half of the barley straw removed, half left in field (default)
  • Wholecrop or most of the barley straw removed from the field.

For your horticultural crops like potatoes you can also indicate what happened to residues:

  • Most of the crop residues left in field (default)
  • Most of the residues removed after harvest.

For green manures, temporary grasslands and cut forages select from the following:

  • Green manure with all residues left in field after mowing (default)
  • Forage crop with half of the residues foraged in place
  • Cash crop with all residues removed from the field.

Where you don’t have the detail to enter we revert back to a sensible default which suits the crop in question. So don’t worry – we’ve done this so the Calculator remains easy to use and crops can be entered just as before where needed.

Emissions now calculated from fruit crops

Until now the Calculator has accounted for fruit crops so yields can be recorded. Our research has reached a level of detail where we can confidently indicate emissions associated with this fruit yield – whereas before we could only account for sequestration from perennial fruit crops. 

Emissions are now calculated from the growing the fruits alongside detail on their management and their renewal rate where applicable. It is this level of detail that has allowed us to take this step – which we think greatly improves the calculator for fruit farms.

Log in to see emissions for: Blackberries, Blackcurrants, Blueberries, Cranberries, Gooseberries, Raspberries, Redcurrants, Strawberries, Apples, Cherries, Grapes, Hops, Kiwiberries, Nuts, Pears, and Plums.

Better record of the operations and activities on your farm

Accounting for fuel use and farming operations just got even easier. We’ve increased the amount of modelled emissions for different farm operations by working closely with industry professionals. 

If you don’t have all your fuel use figures but you know what farming operations you completed or contracted out, we’re confident you will be able to record this. Choose from 47 different activities like drilling, harvesting, soil preparation, bailing and much more. You’ll know the number of different types of operations needed on your farm – it’s likely that if you do it, we can help estimate emissions from it.

Here’s an example of the options now available under the general category of baling:

  • Running a bale wrapper
  • Baling by the bale – Small rectangular bales
  • Baling by the bale – Round bales
  • Baling by the bale – Heston bales
  • Baling by area ~250 Small rectangular bales per ha
  • Baling by area ~15 Round bales per ha
  • Baling by area ~7.5 Heston bales per ha
  • Baling by area (general).

More detail to capture your unique farm’s purchases and waste

More packaging can now be accounted for in your report. © copyright Farm Carbon Toolkit – AI Generated

We listened to feedback and added more options to help record unique purchases on your farm for your carbon footprint report. All farms are different so you may not see all these changes but here are the main additions:

  • There are more material items accounted for in our already extensive list; things like sheep hurdles; packaging used by dairy producers and in veg boxes; and a range of cleaning products, detergents and disinfectants
  • More items thrown away or disposed of can be simply accounted for by selecting options from our extensive list
  • If you produce your own hay and haylage this can be recorded, alongside silage and straw, feed and bedding. Following our updates to crops on-farm, this detail allows more of what you do to be recorded – though it doesn’t necessarily result in emissions calculations. You’ll find full details of what creates emissions within the calculator as you enter each item, and in our methodology and update note.

Your own feed haylage, silage, and more can be recorded in your report. © copyright Farm Carbon Toolkit – AI Generated

Better visibility of Greenhouse gas type and scope

When a report is downloaded in CSV or JSON formats you will now receive a more detailed split of greenhouse gas for each item on your report, which is also broken down by emissions scope. We’ve been asked for this from farmers and agricultural professionals using the calculator – often those reporting onward emissions to others in the supply chain looking for this detail. 

Your reports won’t change

We know consistent reporting is important to you so we have ensured carbon reports in our system will not automatically change because of this update. This means all your calculated figures will stay the same.

Do note however that if you modify an old report by adding items to it, or if you click ‘recalculate’ then your report will update in the relevant places based on this update. You may want to update it, particularly if you have crops in your report, as you may want to see changes due to the improved accuracies mentioned. 

If you want to preserve your old report but also change or build scenarios from it, you can lock your report so it cannot change and create a copy of any report from your dashboard to begin making alterations. Name these reports so you can easily tell them apart. Talk to us if you are not sure and we can advise you.

When is our next update?

These updates are scheduled to take place at least twice per year with an incremental update in Autumn and a larger annual update in Spring. 

We are here for farmers and users and our updates like this reflect all our priorities. We engage our farmer network and the Farm Carbon Toolkit team in the update process by gathering feedback on how the current version is working alongside suggested improvements. We order the feedback we receive by quality and what is achievable, and plan our next upgrade in accordance with our ongoing schedule.

We’d love to hear from you

Our friendly team can be reached to help answer your questions – talk to us.

Remember there are a range of resources for users of the Calculator and useful FAQs and videos too.

Your Farm Carbon Calculator Team – October 2024

Lizzy Parker – Calculator Manager

James Pitman – Calculator Development Officer

Grace Wardell – Calculator Development Officer

Izzy Garnsey – Data Scientist

Calum Adams – Calculator Data Assistant

Michael Brown – Customer Service Officer

Farm Carbon Toolkit – meet the team

New Calculator Updates – April 2024

The FCT Calculator team has released a significant update to the Farm Carbon Calculator, designed to ensure that your reports reflect the latest emissions data and understanding available. This update, which will affect any reports ending after 1st April 2024, encompass a range of improvements aimed at enhancing report accuracy, flexibility and calculator usability. Below are some of the main changes you will see to the calculator.

Updated emissions factors

We want to ensure that your reports align with the most recent scientific research and methodologies, and to that end we have updated our emissions factors across various categories, including: 

  • Updated UK GHG Inventory factors to the latest data (affects fuels, materials, distribution, processing, inventory and waste)
  • Updated the livestock, cropping and input emissions factors in line with the most recent IPCC standard refinements
  • Updated woodland sequestration factors in accordance with the latest Woodland Carbon Code

Numerous other emissions factors have been updated across the calculator, and for a more extensive breakdown of these changes, see Table 1 of our “What’s new for April 2024 update” document on the Calculator resources page.

New factor options

In this update we have also expanded the options available when report building to offer more comprehensive coverage of farm businesses. The new factors we have added include:

  • New fuel options such as alternative diesels and purchased heat and steam
  • Diverse new material options, such as more fencing materials, piping options, packaging choices, and agricultural consumables.
  • Expanded imported organic fertility and cropping options, including whole cropping
  • New fertiliser (including liquid fertilisers) and spray options, with provisions for unlisted items
  • Inclusion of hay and haylage as livestock feed options
  • Expanded distribution options, including electric vehicle haulage and various air freight options

Alongside adding new options, we have provided some more refined options for existing factors in the calculator, including: 

  • New managed hedgerow options, to allow reports to reflect the higher biomass accumulation of young hedges
  • We now have a non-UK electricity option for international users, allowing you to input your emissions using your nation’s specific emissions conversion factor
  • More options for structures, including new agricultural building size options and various new complete fencing options

A full overview of the new additions and refined items are available in Table 2 of the “What’s new for April 2024 update” document, as well as flagged in the new data collection sheets available on our Calculator resources page.

Accounting for Capital Items

With this update we have provided more flexibility in how capital items (such as farm machinery or agricultural buildings) are accounted for to ensure that your reports are in line with your desired reporting approach. You can choose to account for capital items in two ways:

  • Depreciating over 10 years” – The legacy method with emissions “spread” over a 10 year period
  • Upfront” – an approach which is compliant with the GHG protocol agricultural guidance. This way embedded emissions from capital items are associated with the year they were purchased, and only the emissions from your reported period will be included in your report

Not all standards require the inclusion of capital items, so if you are producing a report for someone else you should check whether they want capital items included. 

You can also switch between inventory reporting options by going to “Edit Farm Details” and you will not lose any data switching between the two.

Reporting waste

A new waste disposal reporting approach has been developed to ensure there is an accurate assessment of emission and these are accounted for in a GHG protocol compliant manner. How waste is reported can be selected on the report information page as with the new inventory options:

  • Legacy” is the existing approach which compares emissions from disposing of wastes to what would have been emitted had the waste been sent to landfill (i.e. it includes “avoided emissions”)
  • GHG protocol compliant” is the new recommended option as it discounts any “avoided emissions” and accounts just for the emissions resulting from the disposal method selected

New Data Collection Sheets

To facilitate data collection, we provide updated sheets with all new calculator items flagged for easy reference. You can find these on our Calculator resources page.

More information

For a more detailed overview of these changes and the methodologies behind them, please visit our Calculator resources page. Additionally, our website offers various help and guidance to assist you in reporting your farm businesses’ carbon footprint.

We are dedicated to providing an accurate and user-friendly carbon calculator that can help farmers improve their business and environmental resilience. This update has been the product of the hard work from our team in response to contributions and feedback from our users, so if you have any queries or insights for the calculator please email us at calculator@farmcarbontoolkit.org.uk, and we will work to make this the most accessible and informative tool for you.

New Farm Net Zero Trial – Reducing Worm Burden at Weaning

Weaning shock in lambs can cause physiological stress and slow growth rates. But this effect could be offset by enhanced forage protein content. 

Two of our monitor farmers, Matt Smith and Anthony Ellis, have teamed up with the Farm Carbon Toolkit to launch a new Farm Net Zero trial, examining the effect of protein-rich cover crops on lamb growth rates. This Innovative Farmers field lab will test a bespoke chicory-rich mixture for lamb weaning. The farmers hope it will improve growth rates, reduce lamb production footprint, improve soil health and lamb welfare, as well as reduce the need for wormers.  

For more information see the field lab page on the Innovative Farmers website: www.innovativefarmers.org/field-labs/diverse-covers-and-leys-to-reduce-worm-burden-at-weaning/

Farm Net Zero at Oxford Real Farming Conference 2024

An intrepid band of Farm Net Zero farmers and project staff made their way to Oxford for the Real Farming Conference where we were presenting a session called “It Takes a Farm Community to be Net Zero: A Case Study from Cornwall”. This was a sell-out, with people queuing to get in, and helped to demonstrate the excellent work the FNZ farmers are doing as part of their communities. The film we produced was well-received, even earning a “whoop” from the crowd! It is available to watch here: https://farmcarbontoolkit.org.uk/2024/01/18/five-farms-in-cornwall/

As well as the impressive range of sessions we were able to attend (covering everything from the role of vets in ecological sustainability to farm succession planning), we watched the premiere of “Six Inches of Soil” – a new film about farming starring Farm Net Zero monitor farmer Ben Thomas and featuring Farm Net Zero’s own Hannah Jones.

Premiere of “Six Inches of Soil”

Farm Walk with Carbon Farmer of the Year Finalist, Thomas Gent, Oakley Farm – 23rd May 2024

We are delighted to be able to invite you to attend this Farm Walk to hear from the team at Oakley Farm about how they run their arable farm following regenerative agriculture principles.

Farming with greenhouse gas emissions in mind, as well as all the other targets farmers work to, is fast becoming the norm.

Oakley Farm in South Lincolnshire has been in the Gent family for four generations. Now with father and son team Edward and Thomas managing the 800 ha business, they run their arable farm following regenerative agriculture principles.

Having already fully adopted minimal cultivations and the incorporation of cover crops across the farm, the team are now turning their attention to the potential to incorporate agroforestry and livestock onto their holding. Through continuously refining the management system Edward and Thomas have managed to produce 10 tonne/ha wheat crops with 150kg N and 30 litres diesel per hectare.

Event details

Location to meet/congregate : https://maps.app.goo.gl/UhwiPfPmZQYmCD8i6

What3Word: ///crank.frantic.rules

The farm walk will begin at 1.30pm and will provide an opportunity to find out more about Edward and Thomas’s strategy to reduce emissions on the farm and how this has benefited the business, leading Thomas to be named as one of FCT’s finalists in our first Carbon Farmer of the Year Competition.

The event will take place outside, please wear suitable clothing and footwear. Light refreshments will be provided.

How to book

This event is free but spaces are limited. Please book via our Eventbrite page by following this link

Farm Walk with Carbon Farmer of the Year Finalist, Craig Livingstone, Lockerley Estate, Hampshire – 14th May 2024

We are delighted to be able to invite you to attend this Farm Walk to hear from the team at Lockerley Estate about how they are working to reduce farm-based emissions whilst storing more carbon into soils and non-crop biomass.

Increasingly farming with greenhouse gas emissions in mind, as well as all the other targets farmers work to, is becoming the norm.

Lockerley Estate & Preston Farms, based near Stockbridge in Hampshire is a 2,000ha diverse estate which champions an approach to agriculture where biodiversity, soil health and the wellbeing of the community and future generations is at the heart of everything they do.

Craig Livingstone, Director of Farming & Estates, has four key aims to enable the estate to reduce emissions which are focussed on maximising soil carbon sequestration; reducing reliance on chemical inputs; using the wider estate to sequester more carbon and increasing the natural capital on the estate.

Event details

The farm walk will begin at 1.30pm and will provide an opportunity to find out more about Craig’s strategy to reduce emissions from the estate and how this has benefited the business, leading him to be named as one of FCT’s finalists in our first Carbon Farmer of the Year Competition.

The event will take place outside, please wear suitable clothing and footwear. Light refreshments will be provided.

How to book

This event is free but spaces are limited. Please book via our Eventbrite page by following this link.

Sustainable crop rotations

Looking back at 2023, it can safely be defined as a challenging year with the wettest autumn / winter we have seen for decades. Farmers have not only faced the challenge of maximising yields and optimising soil health, but also battling against the elements to drill crops into the ground. Hoping for a kinder 2024, this blog explores options to build resilience into crop rotations aiming to cultivate a balance between high yields and optimum soil health.

Minimising cultivation

First things first, this blog is not telling you to get rid of the plough. All machinery serves a purpose, it is just about knowing when to intervene. Within systems that have reduced their cultivations or those that have been adopting conservation ploughing (i.e. ploughing one year in three or more), soils tend to be more resilient through improved soil structure. Good soil structure has a matrix of small, medium, and large pore spaces able to retain and drain water as well as provide pockets of air for respiration and gaseous exchange and water for nutrient exchange. When we till the soil, especially when ground conditions are sub-optimum, we run the risk of squashing the pores and causing compaction and soil degradation, reducing water infiltration, increasing anaerobism (lack of oxygen) and building up toxic gases, all contributing to poor soil health and disappointing crop yields.

Carry out a VESS: Visual Evaluation of Soil Structure

It is important to get out there and dig holes; get to know your soil and how it behaves under certain environmental conditions. When you assess the soil structure, look for compaction and note its depth. Can this be remedied by deeper rooting species, or does it require mechanical intervention? Always keep the depth in mind as it’s no good going in too deep or too shallow.

Diversity

Sustainable rotations begin with diversity. A multipronged approach combining arable crops, legumes and cover crops takes full advantage of all the tools we have in the box as arable farmers. Diversity in species above ground matches diversity in species below ground: helping to break pest and disease cycles and improve soil health through provision of various rooting architecture, root exudates and crop residues. The soil is alive and many of the nutrients available to crops and plants come from the activity of soil-dwelling organisms that are busy stabilising, consuming and releasing nutrients for the benefit of the crop. Diversity in crops and roots therefore contribute a rich source of food for soil fauna to feast on, enhancing soil fertility and subsequent crop health and crop yield. 

Where pests and disease more commonly thrive is within monocultures e.g. continuous cereals. We are seeing an increasing reliance on chemicals to control and abate problems within these systems, depleting our soils of beneficials in the process. Similarly, a lack of diversity in roots are only supporting a limited community of microorganisms. This is not sustainable; therefore, we must explore how we can incorporate more species within the rotation. OSR is one of many good examples. It has deep roots and is easily diversified with companions e.g. vetch / buckwheat / berseem clover. Maximising the number of crop species in a rotation will optimise the diversity of organisms below ground.

On farm, an easy way to measure how biologically active our soils are is by monitoring earthworm numbers. Earthworms are at the top of the soil food web and will travel to and reside where there is lots of food; they are also brilliant at breaking down residues and redistributing nutrients throughout the soil profile. How many worms do you count in a spade full of soil? Where are you finding the most? And can those numbers be replicated elsewhere on farm?

Legumes

The blog wouldn’t be complete without talking about legumes. Approximately 78% of the air is nitrogen. If we can harness the power of leguminous plants to fix some of that nitrogen, we can cut costs by reducing the amount of artificial fertiliser whilst also minimising our environmental impact. Consider incorporating peas or beans into the rotation as stand-alone crops, clover as a companion crop or include legumes as part of a cover crop mix. Farmers are often able to reduce the amount of bagged fertiliser used after legumes.

Legumes to build fertility: field beans in an arable rotation

If possible, trial a small reduction across a proportion of the field first and see how your yields fare – you might be pleasantly surprised.

Cover Crops

Utilising cover crops between winter and spring cropping is an excellent approach to building soil health in between cash crops: stabilising soil structure by maintaining living roots in the soil throughout the year, feeding the soil biology and acting as a buffer protecting the soil from adverse weather conditions. 

On top of this, one of the biggest advantages of cover crops is that they are great at scavenging and holding onto residual nutrients left over from the previous crop, reducing losses from leaching. Once destroyed, the nutrients will be released back into the soil, improving nutrient use efficiency, and potentially enabling a reduction in artificial inputs required by the next crop. 

Cover crop mixes should be tailored to your needs and soil type. It’s better to choose species type based on what you are trying to achieve: building fertility, keeping the ground covered, and/or alleviating compaction. 

If possible, conduct trials and aim to include 3 or more species in the mix to capitalise on diversity in both the above-ground biomass for optimised photosynthetic potential (think assortment of leaf shapes to increase surface area from which to harness the sun’s energy), and below-ground biomass through varied rooting structures, depths, shapes and sizes (pumping sugars and carbon into the soil, building soil organic matter and feeding the soil biology).

Livestock Integration

Integrating grazing livestock into your rotation offers an alternative technique to destroying cover crops whilst also adding valuable organic matter to the soil in the form of manure. Including grass and clover leys also gives the ground a break, allowing time for recovery and offers another income stream from grazing or silage / hay making. The benefits of perennial roots in the ground over an extended period, especially if a mix of roots at different depths, will help to improve soil structure and build fertility for future crops.

Grazing livestock returning soil organic matter and building soil health.

Explore the Sustainable Farming Incentive options to see if herbal leys or a 2-year legume fallow could be economically viable.

Monitoring and Adapting

It is important to remember that there is no one-size-fits-all approach; be adaptive and tailor options to local environment and conditions. Trial different methods and see which suits your system best.

Regularly monitoring soil health, accounting for all nutrient sources, and keeping an eye on pest and disease prevalence alongside crop performance and weather is crucial to make informed adjustments to rotations as needed.

In summary, farmers are in a unique position in that yes, we produce emissions in the process of producing nutritious food however, we can also build soil health and boost biodiversity simultaneously contributing to offsetting our own emissions and future proofing our farms and landscapes. Implementing a sustainable crop rotation in the UK is not just about growing crops; it’s about promoting a future where productivity and soil health co-exist. By diversifying crops, integrating legumes, embracing cover crops, minimising tillage, incorporating livestock, and tailoring practices to local conditions, it is possible to achieve a resilient and sustainable agricultural landscape supporting local and wider communities for years to come.

How to avoid ‘double counting’ your carbon

Carbon accounting is a fast-moving space, and here at FCT, keeping on top of best practices is one of our top priorities. We commission regular external reviews of all our emissions factors to make sure we’re as compliant and up-to-date as possible. And yet even with the best data available, there’s always the possibility of human error (we all do it!) cropping up in a carbon report. 

One area we’re particularly keen to address is how to avoid ‘double counting’ when it comes to farming footprints. This refers to counting the same carbon/CO2e in different places, often (but not always) in the same report. 

For example, you might record all your freight and logistics fuel use in the ‘Fuels’ section of our Calculator, only to duplicate the entry under the ‘Distribution’ section. This would result in counting the same emissions twice, artificially inflating the total emissions figure. 

These errors can be subtle and easy mistakes to make, so it’s worth reading on to find out how to avoid them and embrace best practices.

How is double counting possible?

Our Carbon Calculator has many different emissions factors that you can record, reflecting the wide variety of needs and business profiles in modern farming. Because of the need for informative metrics and KPIs, our Calculator sometimes offers the option to record an emission or offset in more than one section. 

You can therefore choose to either record all of the carbon in one section, or to split it out for better insight in your final report. For example, you may want to be able to see the amount of fuel used in farming operations vs. the fuel used in the distribution of goods. Being able to record the carbon in more than one place is crucial to business insight, but it does introduce the risk of error. 

If we want to use these informative metrics, then it’s important to be aware of when you might double-count your carbon. 

Where in the Calculator might I be double counting?

We’ve listed below some of the most common areas where double counting may occur in our Calculator. For each one we’ve given an example of how it occurs, and the best practice in order to avoid it. 

Animal Feeds – Home grown vs. Bought in 

If you are growing your own animal feed on-farm, then you don’t need to account for this in the ‘Livestock’ section. To do so would overestimate your emissions. The Livestock section is only for feeds that are specifically bought in.

To avoid the double count: Make sure that anything recorded as a feed in the Livestock section is a bought-in feed. If not, it doesn’t need to be counted there!

Materials vs. Inventory

The Materials section of our Calculator allows you to record a wide variety of items that are used in construction and repair work. Our Inventory section, on the other hand, is there to record larger capital items such as new outbuildings or farm machinery. This difference is key, as any items within the Inventory section will have their carbon impact depreciated over a period of 10 years.

It’s also possible to record your own custom building projects inside the Inventory section. For example, you might choose to record all the materials associated with a new outbuilding. This might be done so that you can achieve a more precise footprint for a non-standard construction. 

Where materials are purchased for running or regular repairs of existing installations, record these in the Materials section.

To avoid the double count: Make sure you’re not recording any custom-build projects in both Materials and Inventory. They only need to be recorded in one of these sections!

Sequestration – Double Counting Offsets 

If you have previously sold any carbon offsets, for example through soil organic carbon sequestration, then you should not count the offset in your report. To do so would be an example of double counting as the benefits are no longer attributable to your farm business. 

To avoid the double count: Make sure you’re only recording potential sequestration that hasn’t been sold or accounted for elsewhere. 

Sequestration – Double Counting potential sequestration

If you have entered an area of land under the sequestration option: “Soil Organic Matter” or “Soil Organic Carbon” (using information from soil sampling), you should not also enter those areas of land under other sequestration options (such as Countryside Stewardship Schemes, even if the land is receiving payment for that scheme). Direct soil sampling is preferable in this scenario. Similarly, whilst in practice you can “stack” the payments you receive from stewardship grants, you must only enter areas of land for sequestration under one potential sequestration option (so if “My field” is 5ha, I can enter soil sampling data from those 5ha OR the fact that they are under a Countryside Stewardship Scheme).

To avoid the double count: Include each field area under only one potential ‘Sequestration’ option.

Fuel Use – Distribution vs. Farming Operations 

If you want to split out your fuel use into distribution and farming operations, you have the option to record these separately. Any farm fuel use such as red diesel can be recorded under ‘Fuels’. Any fuel used in moving goods can be put under ‘Distribution’. 

To avoid the double count: We recommend splitting out fuel use between ‘Fuels’ (i.e. farm operations) and ‘Distribution’.

The Exceptions

As with all good rules, there are some apparent exceptions:

  • you CAN add multiple crops that have been grown on the same area of land in the same year (but only include those that have been harvested or terminated within the reporting period). 

Free-to-Use Equine Carbon Calculator

Taking The Reins: Equine Carbon Calculator Launched to Inspire Environmental Action

A consortium of equine organisations is rallying the industry to play a leading role in addressing the climate crisis and shaping a better future, with the launch of the first nationwide equine carbon calculator today.

Pioneered by equine environmental sustainability specialists White Griffin and the Farm Carbon Toolkit, in partnership with Derby College Group, Hartpury University and Sparsholt College Group, the calculator has been developed to empower equine businesses and horse owners to better understand their environmental impact and take meaningful steps to mitigate it.

The free-to-use tool – accessible here – also identifies opportunities for businesses to minimise their energy costs and maximise their potential to regenerate the countryside.

While carbon footprint tools are prevalent in the agricultural sector and play a pivotal role in government carbon reduction targets, no such tools have been available at scale for equine premises until now.

Without insights into the scale of the challenges and opportunities, the equine industry is hindered in setting meaningful targets. The equine carbon calculator seeks to bridge this gap, empowering stakeholders to make informed decisions for a sustainable future.

Director of White Griffin, Ruth Dancer said:

“The equine community holds a deep connection to the natural world, so we have a unique opportunity to safeguard it for future generations. By implementing the equine carbon calculator, we can better understand our emissions and find innovative ways to reduce them, saving money and paving the way for a better future.”

The launch of the carbon calculator marks the beginning of a comprehensive campaign to educate and inspire the equine industry on environmental sustainability. This initiative will be complemented by a suite of resources set to launch in autumn, offering support to stakeholders across the horse racing and equestrian sectors.

It follows a broader industry shift toward a more sustainable future for equestrians and horse racing, underscored by the tangible impacts of climate change on the industry. Following the hottest year on record in 2023 coupled with significant flooding, the UK equine industry suffered multiple cancellations across the full spectrum of events, highlighting the urgency of addressing these challenges. 

White Griffin’s previous reports for the British Horse Racing Authority and the British Equestrian Federation, have laid strong foundations for these sustainability initiatives, emphasising the need for tools and resources to support businesses in their sustainability efforts.

Farm Carbon Toolkit project lead, Lizzy Parker said,

“After years of supporting agricultural farms with reducing their environmental impact through a clear and easy-to-use tool, we know how important measuring to monitor is. Our calculator allows equine businesses to properly understand their carbon footprint and make the necessary changes to reduce their emissions.”

The equine carbon calculator is the result of a collaborative effort among academic institutions committed to driving real change in the industry.

The project began when Assistant Principal of Derby College Group, Jon Collins, began work on their own carbon footprint and discovered that while the tool had everything they needed to understand the farm’s footprint, they struggled to use it for their equine yard. Speaking with Sparsholt College Group and Hartpury University, Collins discovered that both organisations were also seeking to develop a tool to support their equine students and businesses and therefore a collaboration was formed in order to pool resources. Collins said,

“I chose Farm Carbon Toolkit to develop the resource because I found their tool to be easiest to use and provided the best user experience. Understanding the busy lives of equine business owners, we knew that we had to develop something that was clear, useful and also provided invaluable insight and comparisons with other equine businesses. We are proud to be delivering this with the support of Landex and will be rolling the tool out to all students, organisations and interested individuals who are seeking to make a difference in their day to day lives to the environment we all depend on.”

Project lead for Hartpury University, Rachel Collins, said: “We’re passionate about sustainability at Hartpury and have worked with both White Griffin and Farm Carbon Toolkit to deliver the most up-to-date training and knowledge to our students on equine sustainability. This tool represents an important step in our commitment to drive the industry forward towards a sustainable future. We are proud to be part of this collaboration, leveraging our expertise to empower stakeholders and effect meaningful change.”

Mark Treagust, Vice Principal of Sparsholt College Group said: “Collaboration within the equine sector is vital to address our industry’s greatest risk – the climate crisis. Leveraging our collective wealth of knowledge in land management and equine welfare, we must support businesses in making impactful changes. This tool initiates a large-scale process for thousands of individuals all over the country. By uniting as academic institutions and utilising the Landex network, we can effect real, much needed change.”

Farm Carbon Calculator External Review Completed

Farm carbon calculator logo

By Liz Bowles, Farm Carbon Toolkit Chief Executive

Having confidence in the accuracy of the Farm Carbon Calculator

In a recent blog post, we explored all the factors that influence the accuracy of carbon footprint, from the data the user inputs, through to the processes that ensure the Farm Carbon Calculator’s calculations and emissions factors are correct, and the ongoing testing carried out. However, like any good service, we understand that you want independent experts to endorse our tools.

Feeling confidence from external experts

Like any good service provider, we actively and regularly seek external review of our tools. In autumn 2023 we asked the independent global climate consultancy, the Carbon Trust to review our Calculator, including the methodologies, calculations, assumptions and factors that underpin a working calculator against the GHG Protocol standards. Following this review, we have developed an Action Plan to address issues identified which will be completed by December 2024.

Alongside this work, Defra commissioned ADAS to look at a number of leading UK Carbon Calculators to improve our understanding of the differences between them and to support methodology harmonisation going forward.Our Calculator was one of those included in the comparison. A key finding from this work was that although there are many ways to complete a carbon footprint inaccurately there is no “one way” of doing it accurately. This is mainly because the different Calculators compared are seeking to answer slightly different questions.

The differences identified were found in the areas of scoping, emissions factors used and standards aligned with

Scoping describes what is measured, and some calculators include things that others don’t. At the Farm Carbon Calculator, for instance, we measure as much as possible of a farm business. This includes, for instance, the embodied energy in buildings and machinery, upstream emissions of various inputs, and gives the option to estimate all potential carbon sequestration on farm. Not all calculators go this far.

There are some standard and some non-standard emissions factors used. For instance, the UK Government produces a comprehensive list of emissions (UK GHG Inventory & Conversion Factors) from fuels and energy, livestock and crops that all calculators will use. But some of the other factors come from a range of other scientific papers and there may be some variability in which ones are used by different calculators. All calculators currently carry out their own research independently of each other.

The UK Department for Energy Security and Net Zero publishes annual updates to emission factors

There are a number of standards that describe what and how to measure carbon footprints. Whilst there are a number of standards that relate to food and farming, there is a lack of consensus over which standard is ‘the one’ to adhere to. We are therefore implementing a process whereby users can choose to align their carbon reports to one of a few recognised standards. This will be available in due course.

You can find the full report and recommendations in the ADAS Report for Defra.

Following this report, we are working actively to support higher levels of harmonisation where this is possible to reduce results variability from different Calculators. 

Hopefully, this gives you, our valued users, confidence that we are rigorous in our processes, that we conduct regular independent reviews, and that we are fully engaged with industry, Government and reviewers to improve and meet the expectations of a maturing sector.

As an organisation that exists to help farmers and growers measure, understand and reduce their carbon footprint,  we always operate in the best interests of our users which includes ensuring our Calculator is as accurate as possible at all times. We are independent, providing a free carbon calculator for farmers and growers, and have a process of continual improvement in place. As a regular user of our Calculator, you can always compare current and past results using the most up-to-date Calculator, allowing you to track business progress to net zero.

You can find all you need to know about the Farm Carbon Calculator here. If you need more information please contact us at calculator@farmcarbontoolkit.org.uk or phone us on 07541 453413.