Tag: sequestration

Sustainable crop rotations

Posted on March 21, 2024 by - Insights, News

Looking back at 2023, it can safely be defined as a challenging year with the wettest autumn / winter we have seen for decades. Farmers have not only faced the challenge of maximising yields and optimising soil health, but also battling against the elements to drill crops into the ground. Hoping for a kinder 2024, this blog explores options to build resilience into crop rotations aiming to cultivate a balance between high yields and optimum soil health.

Minimising cultivation

First things first, this blog is not telling you to get rid of the plough. All machinery serves a purpose, it is just about knowing when to intervene. Within systems that have reduced their cultivations or those that have been adopting conservation ploughing (i.e. ploughing one year in three or more), soils tend to be more resilient through improved soil structure. Good soil structure has a matrix of small, medium, and large pore spaces able to retain and drain water as well as provide pockets of air for respiration and gaseous exchange and water for nutrient exchange. When we till the soil, especially when ground conditions are sub-optimum, we run the risk of squashing the pores and causing compaction and soil degradation, reducing water infiltration, increasing anaerobism (lack of oxygen) and building up toxic gases, all contributing to poor soil health and disappointing crop yields.

Carry out a VESS: Visual Evaluation of Soil Structure

It is important to get out there and dig holes; get to know your soil and how it behaves under certain environmental conditions. When you assess the soil structure, look for compaction and note its depth. Can this be remedied by deeper rooting species, or does it require mechanical intervention? Always keep the depth in mind as it’s no good going in too deep or too shallow.

Diversity

Sustainable rotations begin with diversity. A multipronged approach combining arable crops, legumes and cover crops takes full advantage of all the tools we have in the box as arable farmers. Diversity in species above ground matches diversity in species below ground: helping to break pest and disease cycles and improve soil health through provision of various rooting architecture, root exudates and crop residues. The soil is alive and many of the nutrients available to crops and plants come from the activity of soil-dwelling organisms that are busy stabilising, consuming and releasing nutrients for the benefit of the crop. Diversity in crops and roots therefore contribute a rich source of food for soil fauna to feast on, enhancing soil fertility and subsequent crop health and crop yield. 

Where pests and disease more commonly thrive is within monocultures e.g. continuous cereals. We are seeing an increasing reliance on chemicals to control and abate problems within these systems, depleting our soils of beneficials in the process. Similarly, a lack of diversity in roots are only supporting a limited community of microorganisms. This is not sustainable; therefore, we must explore how we can incorporate more species within the rotation. OSR is one of many good examples. It has deep roots and is easily diversified with companions e.g. vetch / buckwheat / berseem clover. Maximising the number of crop species in a rotation will optimise the diversity of organisms below ground.

On farm, an easy way to measure how biologically active our soils are is by monitoring earthworm numbers. Earthworms are at the top of the soil food web and will travel to and reside where there is lots of food; they are also brilliant at breaking down residues and redistributing nutrients throughout the soil profile. How many worms do you count in a spade full of soil? Where are you finding the most? And can those numbers be replicated elsewhere on farm?

Legumes

The blog wouldn’t be complete without talking about legumes. Approximately 78% of the air is nitrogen. If we can harness the power of leguminous plants to fix some of that nitrogen, we can cut costs by reducing the amount of artificial fertiliser whilst also minimising our environmental impact. Consider incorporating peas or beans into the rotation as stand-alone crops, clover as a companion crop or include legumes as part of a cover crop mix. Farmers are often able to reduce the amount of bagged fertiliser used after legumes.

Legumes to build fertility: field beans in an arable rotation

If possible, trial a small reduction across a proportion of the field first and see how your yields fare – you might be pleasantly surprised.

Cover Crops

Utilising cover crops between winter and spring cropping is an excellent approach to building soil health in between cash crops: stabilising soil structure by maintaining living roots in the soil throughout the year, feeding the soil biology and acting as a buffer protecting the soil from adverse weather conditions. 

On top of this, one of the biggest advantages of cover crops is that they are great at scavenging and holding onto residual nutrients left over from the previous crop, reducing losses from leaching. Once destroyed, the nutrients will be released back into the soil, improving nutrient use efficiency, and potentially enabling a reduction in artificial inputs required by the next crop. 

Cover crop mixes should be tailored to your needs and soil type. It’s better to choose species type based on what you are trying to achieve: building fertility, keeping the ground covered, and/or alleviating compaction. 

If possible, conduct trials and aim to include 3 or more species in the mix to capitalise on diversity in both the above-ground biomass for optimised photosynthetic potential (think assortment of leaf shapes to increase surface area from which to harness the sun’s energy), and below-ground biomass through varied rooting structures, depths, shapes and sizes (pumping sugars and carbon into the soil, building soil organic matter and feeding the soil biology).

Livestock Integration

Integrating grazing livestock into your rotation offers an alternative technique to destroying cover crops whilst also adding valuable organic matter to the soil in the form of manure. Including grass and clover leys also gives the ground a break, allowing time for recovery and offers another income stream from grazing or silage / hay making. The benefits of perennial roots in the ground over an extended period, especially if a mix of roots at different depths, will help to improve soil structure and build fertility for future crops.

Grazing livestock returning soil organic matter and building soil health.

Explore the Sustainable Farming Incentive options to see if herbal leys or a 2-year legume fallow could be economically viable.

Monitoring and Adapting

It is important to remember that there is no one-size-fits-all approach; be adaptive and tailor options to local environment and conditions. Trial different methods and see which suits your system best.

Regularly monitoring soil health, accounting for all nutrient sources, and keeping an eye on pest and disease prevalence alongside crop performance and weather is crucial to make informed adjustments to rotations as needed.

In summary, farmers are in a unique position in that yes, we produce emissions in the process of producing nutritious food however, we can also build soil health and boost biodiversity simultaneously contributing to offsetting our own emissions and future proofing our farms and landscapes. Implementing a sustainable crop rotation in the UK is not just about growing crops; it’s about promoting a future where productivity and soil health co-exist. By diversifying crops, integrating legumes, embracing cover crops, minimising tillage, incorporating livestock, and tailoring practices to local conditions, it is possible to achieve a resilient and sustainable agricultural landscape supporting local and wider communities for years to come.

How to avoid ‘double counting’ your carbon

Posted on March 21, 2024 by - Calculator, News

Carbon accounting is a fast-moving space, and here at FCT, keeping on top of best practices is one of our top priorities. We commission regular external reviews of all our emissions factors to make sure we’re as compliant and up-to-date as possible. And yet even with the best data available, there’s always the possibility of human error (we all do it!) cropping up in a carbon report. 

One area we’re particularly keen to address is how to avoid ‘double counting’ when it comes to farming footprints. This refers to counting the same carbon/CO2e in different places, often (but not always) in the same report. 

For example, you might record all your freight and logistics fuel use in the ‘Fuels’ section of our Calculator, only to duplicate the entry under the ‘Distribution’ section. This would result in counting the same emissions twice, artificially inflating the total emissions figure. 

These errors can be subtle and easy mistakes to make, so it’s worth reading on to find out how to avoid them and embrace best practices.

How is double counting possible?

Our Carbon Calculator has many different emissions factors that you can record, reflecting the wide variety of needs and business profiles in modern farming. Because of the need for informative metrics and KPIs, our Calculator sometimes offers the option to record an emission or offset in more than one section. 

You can therefore choose to either record all of the carbon in one section, or to split it out for better insight in your final report. For example, you may want to be able to see the amount of fuel used in farming operations vs. the fuel used in the distribution of goods. Being able to record the carbon in more than one place is crucial to business insight, but it does introduce the risk of error. 

If we want to use these informative metrics, then it’s important to be aware of when you might double-count your carbon. 

Where in the Calculator might I be double counting?

We’ve listed below some of the most common areas where double counting may occur in our Calculator. For each one we’ve given an example of how it occurs, and the best practice in order to avoid it. 

Animal Feeds – Home grown vs. Bought in 

If you are growing your own animal feed on-farm, then you don’t need to account for this in the ‘Livestock’ section. To do so would overestimate your emissions. The Livestock section is only for feeds that are specifically bought in.

To avoid the double count: Make sure that anything recorded as a feed in the Livestock section is a bought-in feed. If not, it doesn’t need to be counted there!

Materials vs. Inventory

The Materials section of our Calculator allows you to record a wide variety of items that are used in construction and repair work. Our Inventory section, on the other hand, is there to record larger capital items such as new outbuildings or farm machinery. This difference is key, as any items within the Inventory section will have their carbon impact depreciated over a period of 10 years.

It’s also possible to record your own custom building projects inside the Inventory section. For example, you might choose to record all the materials associated with a new outbuilding. This might be done so that you can achieve a more precise footprint for a non-standard construction. 

Where materials are purchased for running or regular repairs of existing installations, record these in the Materials section.

To avoid the double count: Make sure you’re not recording any custom-build projects in both Materials and Inventory. They only need to be recorded in one of these sections!

Sequestration – Double Counting Offsets 

If you have previously sold any carbon offsets, for example through soil organic carbon sequestration, then you should not count the offset in your report. To do so would be an example of double counting as the benefits are no longer attributable to your farm business. 

To avoid the double count: Make sure you’re only recording potential sequestration that hasn’t been sold or accounted for elsewhere. 

Sequestration – Double Counting potential sequestration

If you have entered an area of land under the sequestration option: “Soil Organic Matter” or “Soil Organic Carbon” (using information from soil sampling), you should not also enter those areas of land under other sequestration options (such as Countryside Stewardship Schemes, even if the land is receiving payment for that scheme). Direct soil sampling is preferable in this scenario. Similarly, whilst in practice you can “stack” the payments you receive from stewardship grants, you must only enter areas of land for sequestration under one potential sequestration option (so if “My field” is 5ha, I can enter soil sampling data from those 5ha OR the fact that they are under a Countryside Stewardship Scheme).

To avoid the double count: Include each field area under only one potential ‘Sequestration’ option.

Fuel Use – Distribution vs. Farming Operations 

If you want to split out your fuel use into distribution and farming operations, you have the option to record these separately. Any farm fuel use such as red diesel can be recorded under ‘Fuels’. Any fuel used in moving goods can be put under ‘Distribution’. 

To avoid the double count: We recommend splitting out fuel use between ‘Fuels’ (i.e. farm operations) and ‘Distribution’.

The Exceptions

As with all good rules, there are some apparent exceptions:

  • you CAN add multiple crops that have been grown on the same area of land in the same year (but only include those that have been harvested or terminated within the reporting period). 

Open for entries: Carbon Farmer of the Year

Posted on April 10, 2024 by - Carbon Farmer of the Year, News

Announcing the launch of the 2024 Carbon Farmer of the Year Competition

February of this year sees the launch of the 2024 Farm Carbon Toolkit’s Carbon Farmer of the Year Competition. This competition champions UK farmers who are leading the way in adopting farming practices and developing new technologies which reduce farm emissions whilst optimising output, and adapting to climate change. 

After the success of last year’s competition we are delighted to announce that the 2024 competition is now open for entries. Click here to learn more.

The Financial Reward of Reducing Carbon

Posted on February 13, 2024 by - Insights, News, Uncategorized

By Robert Purdew, Farm Carbon and Soils Advisor

There is a growing concern about carbon “tunnel vision” in agriculture, where the sole focus is on reducing emissions without considering the bigger picture. Reducing emissions is crucial, yet it’s important to acknowledge that it is only one piece of the puzzle and focusing solely on carbon can neglect factors such as soil health, water quality, biodiversity and other issues such as pollution. There is also often concern from farmers about how the pressures to achieve net zero targets can impact profitability, especially when incentives to be net zero are limited or non-existent, and investments in the infrastructure and technology required to transition to low-carbon farming are high.

But this doesn’t have to be the case. We can use an understanding of a farm’s emissions to make informed decisions to change management practices that can lead directly to both reduced emissions and increased profitability, and we can point to an increased number of farmers who are doing just this.

Mike and Sam Roberts farm 435 acres at Blable Farm, of which a large proportion is down to herbal leys. After Sam returned to the farm in 2018 a decision was made to review the whole operation and, in conjunction with James Daniel of Precision Grazing, the decision was made to reduce the herd slightly from 180 to 150 cows, implement rotational grazing on diverse leys and to focus on reducing inputs and improving soil health.

Cattle out wintering at Blable Farm

The effects were immediate and obvious. Soil health has seen a rapid improvement with better structure, increased earthworm numbers and soil organic matter is on the rise. The grazing period has been increased from 6 to 12 months and the farm hasn’t bought fertiliser since 2021, with none being used last year. Importantly, animal performance has increased in line with improved soil health and while cow numbers were reduced initially Mike and Sam are looking at increasing numbers again. All of this has seen a significant saving on input costs which has been re-invested into the business, including a full soil audit to better understand how soil health is improving. In line with reduced costs on-farm emissions have been reduced significantly with Mike confident the farm can reach net zero within 5 years, a commitment made as part of being a demo farm for the Farm Net Zero project.

Another example of a farmer using an understanding of their carbon footprint to drive down costs and improve profitability is Tom Burge of Oaremead Farm. Tom farms 760 acres of grassland on Exmoor and runs both a suckler herd and commercial sheep flock. In 2017 Tom began shifting to a more regenerative farming system which predominantly focussed on an improvement in grazing management, once again aided by James Daniel from Precision Grazing.

A person standing in a grassy field with cows Description automatically generated

Over 5 years, Tom has completely cut out the use of artificial fertiliser and reduced his feed use by over 70%. This has been made possible by an increase in dry matter grown of 0.9 tDM/ha, through improved grazing management, and has reduced input costs by 50%, with a similar reduction in emissions from inputs, as shown in the chart below. Crucially the farm is now profitable before taking into account income from subsidies and environmental schemes. In the next 5 years, Tom plans to completely cut out bought-in feed and to have halved fuel use and, like Mike and Sam, be well on the road to net zero while remaining highly productive and profitable.

Oaremead Farm emissions from inputs

These are just two of an increasing number of examples that we are coming across as we work with more and more farmers who are using their carbon emissions as just one metric to help improve their farm businesses. And far from impacting just a farm’s emissions and bottom line, the management changes that are being implemented are having beneficial impacts on those ecosystem services mentioned previously, soil health, biodiversity, water quality and reduced pollution. Proof if ever it was needed of the potential for long-term sustainability within our farming systems.

Five farms in Cornwall on a journey towards Net Zero

Posted on January 18, 2024 by - Farm Net Zero, Insights, News

We’re excited to share a series of five new videos that showcase some of the farms in Cornwall that are part of the Farm Net Zero project.

Each video shares a different farm’s journey as it works to improve the environment, produce nutritious food, while also responding to climate risks, such as flooding. There is a specific focus in these videos on how the farms are engaging within their local communities, to help tackle these issues. The Farm Net Zero project includes practical advice for farmers on how to reduce greenhouse gas emissions, showcases innovation, provides robust science through soil testing and carbon footprinting, and inspires other farmers to tell their stories to consumers on the steps that they are taking to address climate change and protect soil health.

The full-length video below includes all of the following five stories. If you prefer to view each story separately, please simply click on each of the links here:

A Day in the Life of…Jonathan Smith, Impact Manager

Posted on May 20, 2024 by - Insights, News

As a grower of organic vegetables, my day always starts on the farm.

Depending on the time of year, I need to open polytunnels, water plants, and harvest crops. I sell all my produce locally on the Isles of Scilly where I live and work, so once harvested I will go and deliver the veg to the point of sale. I also have to fit in planting, sowing, weeding and other jobs.

Being a grower gives me huge pleasure, despite the challenges, but also a grounded perspective on farming, growing and carbon management on farms. I look at my farm often through a carbon lens, and making management decisions to minimise carbon emissions, whilst maximising carbon sequestration feels second nature. My farm business has been consistently carbon-negative for many years.

After lunch, I put a different hat on and work for Farm Carbon Toolkit as the Impact Manager. Having previously led the Farm Carbon Calculator development (since its creation in 2009), this new role gives me a different perspective on the organisation. My primary aim is to understand how we measure the impact of the work we do, and to help the organisation increase its impact. Many organisations in the social enterprise sector are very driven by social and environmental change, but can easily overlook how effective their work is and what change it’s delivering. After all, this is a primary reason many of us in FCT are in the organisation!

Day to day, I work across the organisation in trying to measure what we do currently, and how to collect that information. Once I have that, I’m involved in understanding what the opportunities are for change in the way we operate. This work feeds into the day-to-day work on communications, as well as the longer-term strategy work focussed on the next three years. At the end of the day, we want to help as many farmers and growers as possible reach carbon net zero or beyond.

As a Director, I also have oversight of the organisation, and this is a role I enjoy a lot. However my favourite parts are talking to the farmers and growers who are on the journey to net zero – or already there, and seeing the changes they’ve implemented. That is always inspiring and makes the work of the organisation very tangible.

A Day in the Life – Michael Brown, Calculator Customer Service Officer

Posted on October 28, 2024 by - Insights, News

A little challenge every day

Chances are, if you’re interested in measuring the carbon footprint of your farm you know a bit about what my job entails. I’m here to support you and help more and more farmers measure the carbon footprint of their farm. Each day, I’m immersed in both the challenges and rewards of what this involves:

We get it – carbon footprinting a farm can be hard, every farm is different, time is short and sometimes we all face problems fitting the farm information we have into an online carbon calculator.

Rising to the challenge

Behind our calculator is an approachable team who benefit from a two-way process where we help you and the more we do this, the more we learn and can improve the calculator in the long term.

We put together online resources; we generate and record ideas which guide ongoing research into methodologies of calculating GHG emissions in agriculture; and we contribute to the development and testing of our software.

When we develop, and when we test – we’re looking to see if things are getting better – and since starting in April 2024 we’ve already seen some great improvements rolled out to the calculator. My role contributes toward this on an average day.

Starting the Day: Checking in with the users

The day kicks off with a review of support requests from users across the UK and farms around the world. Our users vary widely, from small family farms to large agricultural enterprises, and their technical needs are just as diverse. Questions cannot be predicted but range from understanding how to input specific data into the calculator to interpreting their carbon footprint results.

I love interacting with those farmers taking the important step of calculating a footprint. There are many reasons for doing this – and all are inspiring, so it is great to hear from those involved. By solving problems or helping guide users my small but crucial role builds our understanding of carbon data. 

Mid-Morning: Developing resources for sustainable agriculture

A big part of my role is creating and updating online resources that help users maximize the calculator’s potential. I’ll work on developing these resources – which you can view in our FAQ’s, downloadable resources, instructional videos, or during training sessions. 

We think many farmers work long hours and appreciate a well-organized, easy-to-navigate guide that helps self-starters make the most of the Calculator – we believe it should be possible to use the tool yourself and feel that satisfaction of having achieved something.

Afternoon: Finding a solution for businesses or environmental professionals

The afternoon usually involves working closely with our Calculator Manager and other team members to ensure the Farm Carbon Calculator continues to deliver for our professional and commercial users. 

We rely on the legion of professionals, organisations, and partners who pay to use our software through licences, our excellent API, or in other ways to reach ever more farmers. Their fees support the work we do in all senses and this is clear in all our approaches to commercial work.

Staying informed in this area is critical for our relevance as the opportunities for us to help those working in carbon management and agricultural sustainability are constantly evolving.

With Lizzy Parker, Calculator Manager, at FCT’s Annual Field Day 2024

Wrapping up: Reflecting on progress and user feedback

Toward the end of the day, I might be reviewing feedback from users on recent updates or features, and discussions from the morning. Positive feedback is always motivating, and constructive suggestions are tracked to help us improve.

Without farmers and others working hard on their footprints and their sustainability I either wouldn’t have a job, or wouldn’t have the inspiration to know what to do next. With that in mind – throughout the day you can reach me at the end of the phone or on email – so give me a call. 

If you are an agricultural professional or large organisation you may want to see the services available for you, book a demo with us, or let me know if you want to learn more. Everyone else using the tool – just get started, create an account, or get in touch. You can reach us Monday to Friday 9am to 5pm on calculator@farmcarbontoolkit.org.uk 

A Day in the Life of … Rachel Hucker, Operations Administrator

Posted on July 12, 2024 by - Insights, News

I’m the Operations Administrator at the Farm Carbon Toolkit (FCT), a role which provides a range of administrative and operational support across the organisation. I also arrange our regular, in-person Away Days; organise, alongside our Advisory team, our Annual Field Day and I support additional FCT events throughout the year.

Every day is genuinely different, and I always open my laptop on a morning or check my phone not knowing quite what to expect from the day ahead (despite having made a clear plan and ‘to do’ list!). 

I could be attending internal or external meetings, either taking notes or contributing from an operations perspective. 

I may be updating posts and blogs on our website or creating newsletters. 

I might be booking accommodation, travel, event stands or buying tickets for us to attend key agricultural shows then answering phone calls and email enquiries from a wide range of people – from our existing farmer and sector partners to new growers or farmers seeking advice; from agronomists to journalists; from individuals interested in attending our events to prospective candidates for roles within FCT. I never quite know what I’m going to be asked about, which keeps me on my customer service toes! 

Alternatively, I could be getting deeply involved in event planning such as creating Eventbrite pages and blogs, liaising with caterers, sourcing portaloos, visiting host farms…

I also work closely with our Board of Directors, providing admin support for regular Board and various Director-led Meetings.

The joy of this role is that I get to work with all of my FCT colleagues and our Directors in one capacity or another, and I therefore get to know everyone individually. As we mostly work remotely, it’s lovely to have that contact with everyone and to really feel part of both the whole organisation and also of each individual team. 

The FCT team is one of the most friendly, approachable, kind and supportive group of people I have worked with – and also one of the most passionate and dynamic. Our in-person get-togethers are always really chatty, supportive and fun – and something I always look forward to!

Previously, I have worked as a foreign language tutor in Singapore after a Mod. Langs. degree at the University of Sheffield; I’ve been a multilingual Executive PA in the finance sector in the City of London; had a cheeky career break in the West Indies; supported the Vice-Chancellor of the University of Exeter for 14 years as their Executive PA. I qualified as a Swedish Massage Therapist in 2017 and have a private practice as well as a part-time role in a Wellness Spa.

In late 2023, I finally acted upon a realisation that I wanted to learn more about the sustainability sector and to start doing something practical to help our environment and to nurture our natural resources. The Farm Carbon Toolkit was the perfect organisation to work for (in my view!), as our teams work directly with, support and advise farmers and growers as they experiment with new ways of working to achieve a more sustainable farming or growing model. I often feel like the new girl at school as I learn something almost every day from the passionate and overwhelmingly knowledgeable people I work with. I absolutely wouldn’t have it any other way! 

I love being a part, however small, of this sector and particularly of this team, as I feel we never lose sight of the bigger environmental picture while spending, literally, a lot of our time down in the weeds!

A Day in the Life of…James Pitman, Calculator Development Officer

Posted on April 17, 2024 by - Insights, News

The day-to-day responsibilities of a carbon calculator development officer are a little more sedentary than those of our farmers or my advisory colleagues, but the intricacies of the job mean my life is far from mundane.

My primary objective is to continuously work on refining and enhancing our carbon calculator, ensuring it remains an accurate, trusted, and invaluable tool for UK farmers. 

A significant portion of my time is dedicated to the core emissions factors that underpin the calculator. This can mean verifying or updating our existing factors, researching new factors, or addressing the requests from users and advisors about factors they want on the calculator. In the last couple months I have been working closely on the Version 1.6.0 update to the calculator, which required a comprehensive review of all the emissions factors we use. This was a formidable task, and I have spent countless hours scouring through spreadsheets, deep in research papers, and having lively video calls with the team and our software developers. For all this work we have been able to add great functionality to the calculator and made really exciting plans for what is in the pipeline (no spoilers!), so the toil has paid off and I am very satisfied with the extent of new data and functionality we have been able to add in such a short window of time.

Since starting with FCT in December 2023, I have also been fortunate enough to help in the creation of the Equine Carbon Calculator, an industry-leading initiative aimed at quantifying emissions from the equine sector. During this development process you could have found me doing a myriad of tasks, from researching how the emissions would vary between different horse breeds, to calculating the materials needed for stable buildings and their embedded emissions, or beta-testing the new website and calculator. The opportunity to be involved with the Equine Carbon Calculator was fantastic and I have been thrilled to see how many reports have been built in it since it went live in March 2024.

The enthusiasm and passion FCT and its community have for sustainable agriculture is inspiring, and as a new member of the company I have never felt so welcome and excited about a new job. I hope that my work with the calculator team will create an efficient and effective tool for you all, and with that I am going to dive back into the research papers!

A Day in the Life of… Liz Bowles, Chief Executive

Posted on January 11, 2024 by - Insights, News

Being Chief Exec of the Farm Carbon Toolkit is a privilege. I have a team of committed, enthusiastic and supremely knowledgeable people working with me who are dedicated to supporting farmers to understand their farm carbon footprint and to reduce greenhouse gas emissions and increase carbon sequestration, whilst maintaining thriving, biodiverse businesses.  

We are a relatively small organisation, but I always love it when people tell me that they keep coming across the team as this means we are being noticed and, even more importantly, that people like what we are doing. Last week was just such an example. We were involved in a number of sessions at the Oxford Farming Conference including showcasing Farm Net Zero Cornwall and the great strides farmers involved in the group are making towards Net Zero. We also featured in the premiere of the film “Six Inches of Soil”  and were mentioned by a number of other speakers at the conference whom we work with.

There is no such thing as a typical day for me.

I do start off with a list of what I would like to get done during the day and highlight the tasks which are important/ urgent, but then things happen, such as people making contact with me to discuss exciting new activities with which we could get involved. It is just about impossible to know which opportunities are the best to take forward from the great number which come our way every day, but my watch word is to pursue working with like-minded organisations whose first instinct is to think about what they can do to support reducing the greenhouse gas emissions from agriculture and who, like us, believe that farmers are supremely well-placed to remove carbon from the atmosphere through how they farm.

Over the last few months I have been developing relationships with other popular Carbon Calculators to enable us to work together where possible to harmonise Calculator methodologies, so that farmers’ Carbon Calculator results will be more comparable in future. This, I believe, will increase the uptake of their use. We know that the requirement to provide information on farm emissions and removals will increase over time and we are committed to continually improving our Calculator so that farmers who are taking action to reduce their carbon footprint can see this fully reflected in their reporting. We are also committed to providing our Calculator directly to farmers for free.